System requirements

XenServer requires at least two separate physical x86 computers: one to be the XenServer host and the other to run the XenCenter application or the XenServer Command-Line Interface (CLI). The XenServer host computer is dedicated entirely to the task of running XenServer and hosting VMs, and is not used for other applications.


XenServer supports only drivers and supplemental packs that are provided by us being installed directly in the host’s control domain. Drivers provided by third-party websites, including drivers with the same name or version number as those we provide, are not supported.

The following exceptions are supported:

  • Software supplied as a supplemental pack and explicitly endorsed by us.

  • Drivers that NVIDIA provides to enable vGPU support. For more information, see NVIDIA vGPU.

    Other drivers provided by NVIDIA, for example, the Mellanox drivers, are not supported with XenServer unless distributed by us.

To run XenCenter use any general-purpose Windows system that satisfies the hardware requirements. This Windows system can be used to run other applications.

When you install XenCenter on this system, the XenServer CLI is also installed. A standalone remote XenServer CLI can be installed on any RPM-based Linux distribution. For more information, see Command-line interface.

XenServer host system requirements

Although XenServer is usually deployed on server-class hardware, XenServer is also compatible with many models of workstations and laptops. For more information, see the Hardware Compatibility List (HCL).

The following section describes the recommended XenServer hardware specifications.

The XenServer host must be a 64-bit x86 server-class machine devoted to hosting VMs. XenServer creates an optimized and hardened Linux partition with a Xen-enabled kernel. This kernel controls the interaction between the virtualized devices seen by VMs and the physical hardware.

XenServer can use:

  • Up to 6 TB of RAM

  • Up to 16 physical NICs

  • Up to 448 logical processors per host.


    The maximum number of logical processors supported differs by CPU. For more information, see the Hardware Compatibility List (HCL).

The system requirements for the XenServer host are:


One or more 64-bit x86 CPUs, 1.5 GHz minimum, 2 GHz or faster multicore CPU recommended.

To support VMs running Windows or more recent versions of Linux, you require an Intel VT or AMD-V 64-bit x86-based system with one or more CPUs.


Ensure that you enable hardware support for virtualization on the XenServer host. Virtualization support is an option in your system firmware. It is possible that your hardware might have virtualization support disabled. For more information, see your server documentation.

To support VMs running supported paravirtualized Linux, you require a standard 64-bit x86-based system with one or more CPUs.


2 GB minimum, 4 GB or more recommended

Disk space

  • Locally attached storage with 46 GB of disk space minimum, 70 GB of disk space recommended
  • SAN via HBA (not through software) when installing with multipath boot from SAN.

For a detailed list of compatible storage solutions, see the Hardware Compatibility List (HCL).


100 Mbit/s or faster NIC. One or more Gb, or 10 Gb NICs is recommended for faster export/import data transfers and VM live migration.

We recommend that you use multiple NICs for redundancy. The configuration of NICs differs depending on the storage type. For more information, see the vendor documentation.

XenServer requires an IPv4 network for management and storage traffic.


  • Ensure that the time setting on your server is set to the current time in UTC.

  • In some support cases, serial console access is required for debug purposes. When setting up the XenServer configuration, we recommend that you configure serial console access. For hosts that do not have physical serial port or where suitable physical infrastructure is not available, investigate whether you can configure an embedded management device. For example, Dell DRAC. For more information about setting up serial console access, see CTX228930 - How to Configure Serial Console Access on XenServer 7.0 and later.

XenCenter system requirements

XenCenter has the following system requirements:

  • Operating System:
    • Windows 10
    • Windows 11
    • Windows Server 2016
    • Windows Server 2019
  • .NET Framework: Version 4.8
  • CPU Speed: 750 MHz minimum, 1 GHz or faster recommended
  • RAM: 1 GB minimum, 2 GB or more recommended
  • Disk Space: 100 MB minimum
  • Network: 100 Mbit/s or faster NIC
  • Screen Resolution: 1024x768 pixels, minimum

If you want XenCenter to be able to launch an external SSH console that connects to your server, install one of the following applications on the system:

  • PuTTY
  • OpenSSH (installed by default on some Windows operating systems)

For more information, see Configure XenCenter to use an external SSH console.

Supported guest operating systems

For a list of supported VM operating systems, see Guest operating system support.

Pool requirements

A resource pool is a homogeneous or heterogeneous aggregate of one or more hosts, up to a maximum of 64. Before you create a pool or join a host to an existing pool, ensure that all hosts in the pool meet the following requirements.

Hardware requirements

All of the servers in a XenServer resource pool must have broadly compatible CPUs, that is:

  • The CPU vendor (Intel, AMD) must be the same on all CPUs on all servers.

  • All CPUs must have virtualization enabled.

Other requirements

In addition to the hardware prerequisites identified previously, there are some other configuration prerequisites for a host joining a pool:

  • It must have a consistent IP address (a static IP address on the host or a static DHCP lease). This requirement also applies to the servers providing shared NFS or iSCSI storage.

  • Its system clock must be synchronized to the pool coordinator (for example, through NTP).

  • It cannot be a member of an existing resource pool.

  • It cannot have any running or suspended VMs or any active operations in progress on its VMs, such as shutting down or exporting. Shut down all VMs on the host before adding it to a pool.

  • It cannot have any shared storage already configured.

  • It cannot have a bonded management interface. Reconfigure the management interface and move it on to a physical NIC before adding the host to the pool. After the host has joined the pool, you can reconfigure the management interface again.

  • It must be running the same version of XenServer, at the same patch level, as hosts already in the pool.

  • It must be configured with the same supplemental packs as the hosts already in the pool. Supplemental packs are used to install add-on software into the XenServer control domain, dom0. To prevent an inconsistent user experience across a pool, all hosts in the pool must have the same supplemental packs at the same revision installed.

  • It must have the same XenServer license as the hosts already in the pool. You can change the license of any pool members after joining the pool. The host with the lowest license determines the features available to all members in the pool.

XenServer hosts in resource pools can contain different numbers of physical network interfaces and have local storage repositories of varying size.


Servers providing shared NFS or iSCSI storage for the pool must have a static IP address or be DNS addressable.

Homogeneous pools

A homogeneous resource pool is an aggregate of servers with identical CPUs. CPUs on a server joining a homogeneous resource pool must have the same vendor, model, and features as the CPUs on servers already in the pool.

Heterogeneous pools

Heterogeneous pool creation is made possible by using technologies in Intel (FlexMigration) and AMD (Extended Migration) CPUs that provide CPU masking or leveling. These features allow a CPU to be configured to appear as providing a different make, model, or feature set than it actually does. These capabilities enable you to create pools of hosts with different CPUs but still safely support live migrations.

For information about creating heterogeneous pools, see Hosts and resource pools.

System requirements